Inorganic water-based penetrating crystallizer

Product introduction

FEM Inorganic water-based penetrating crystallizer is a water-based waterproof material containing proprietary catalysts and active chemicals. It can quickly and effectively react with calcium hydroxide, calcium chloride, calcium silicate, etc. in the concrete structural layer to form inert crystals. Embed in the capillary pores of concrete and seal micro-cracks, thereby enhancing the compactness and compressive strength of the concrete surface.

Implementation standards

JC/T1018-2006 II type DPS《 Water-based penetrating crystalline waterproof material》

Ten advantages

It has the function of automatically repairing micro-cracks and other defects, and has strong resistance to changes in the base layer.

Suppresses cracking caused by early strength of concrete

Can be used as a curing agent instead of watering for curing

Strong permeability, improve compressive strength

Resistant to weathering, carbonization and chloride ion erosion

Improve the alkalinity and acid and alkali corrosion resistance of concrete

Inorganic does not age, is triggered when exposed to water, and starts over and over again.

It is easy to construct and can be used for construction on the front and back surfaces of concrete structures.

One-time construction is durable and waterproof, eliminating the trouble of annual maintenance.

Green and environmentally friendly, can be used for waterproofing treatment of drinking water

Precautions for use

The foundation surface must be cleaned to expose the concrete or cement mortar surface.

Generally, spray 2-3 times, and then spray the next layer after the first layer is dry. The actual dosage depends on the actual situation.

There is water or it is too humid (The material cannot penetrate )The base surface must be treated before construction.

Generally repairable 0.7 mm For the following cracks, crack repair generally takes 7 days to 6 months.

It is strictly prohibited to use non-concrete or grout type foundations.

Precautions

This product is non-toxic, harmless, non-flammable, non-volatile, stored at normal temperature and pressure, and transported as general cargo.

statement:

The applicable scope, usage conditions and suggestions of Furman Group products are formulated based on the company's latest technology and experience. They are based on normal conditions and appropriate storage, handling and appropriate use. Due to the actual application of raw materials and coordination Due to different conditions of use, the conditions stated in this product brochure, written suggestions and other advice do not guarantee product performance and applicability to special circumstances, and do not assume legal liability. The rights of third parties must be respected. Users are advised to pay attention to the company's latest product manuals.