Polymer cement waterproof coating

Product introduction

Furman polymer cement waterproof coating is made of a specific high-performance polymer emulsion as the main body and a certain proportion of cement. The rubber-like waterproof membrane formed by this product after curing has excellent adhesion, impermeability, crack resistance, durability and other functions, and is easy to construct.

use

1. It is widely used in waterproofing, anti-leakage and moisture-proof projects of exterior walls, toilets, bathrooms, kitchens, pools, basements, roofs and other buildings.

2. It is used to prevent leakage and moisture-proof masonry made of porous materials such as aerated concrete and hollow bricks.

3. Construction work can be performed on both dry and wet substrates.

Instructions

1.Base treatment: The surface of the base should be smooth and solid, without honeycombs, pitted surfaces, dust and oil, and the yin and yang corners should be made into arcs; the defective parts of the base should be repaired before construction.

2.Coating construction: ingredients, according to emulsion glue: cement =1：0.5 weight ratio and stir evenly. Then scrape the prepared waterproof coating on the base structure 2-3 times, and the thickness meets the requirements of waterproofing standards.The interval between each coat is about 1-2 hours (Specific adjustments should be made according to weather and environmental conditions, so as not to stick to your hands. )3.Reinforcement treatment: If the waterproof layer needs to be reinforced, non-woven fabric or alkali-free fiberglass cloth can be used as the matrix for reinforcement.

Precautions

1.The latex glue should be stirred evenly before use.

2.The cement is ordinary Portland cement of grade 42.5 and above.

3.Latex glue should be stored in a cool place.

Implementation standards:GB/T  23455--2009《 Polymer cement waterproof coating》

Recommended dosage:1-2㎏/㎡，The specific dosage should be determined according to the actual requirements of the project.

Shelf life:24After several months, there will be a small amount of precipitation, which will not affect the adaptation effect after shaking.

statement:

The applicable scope, usage conditions and suggestions of Furman Group products are formulated based on the company's latest technology and experience. They are based on normal conditions and appropriate storage, handling and appropriate use. Due to the actual application of raw materials and coordination Due to different conditions of use, the conditions stated in this product brochure, written suggestions and other advice do not guarantee product performance and applicability to special circumstances, and do not assume legal liability. The rights of third parties must be respected. Users are advised to pay attention to the company's latest product manuals.