Concrete synergist (liquid)

Product introduction

The main component of concrete synergist is organic matter, which is a powerful dispersant.

Features

Improve the performance of fresh concrete: improve workability, reduce bleeding, and reduce pumping friction;

Efficient activation function: Maximize the activation of water-reducing agents and dispersed cementitious materials to increase concrete strength or reduce cement dosage;

Resistant to freezing and thawing /Anti-carbonation: Improve the freeze-thaw and carbonation resistance of concrete;

Impermeability /Crack resistance: Enhanced compactness, improved concrete impermeability, and reduced concrete cracks;

No corrosion: no external chloride ions, potassium and sodium ions are added, and the sodium sulfate content is controlled at the lowest level;

Energy saving and consumption reduction: reduce cement usage10 ～15%，Can maintain or exceed benchmark strength;

Technical performance and recommended dosage

Technical performance products are non-toxic and pollution-free, with zero emissions from production and are green and environmentally friendly building materials.

The recommended dosage is 0.6% of the cementitious material dosage ~1.0%。【 Note: The specific dosage should be determined according to the actual requirements of the project. 】

How to use and precautions

Strictly follow the established water-cement ratio in the laboratory to effectively control the strength fluctuation of concrete after adding synergists within the normal range;

Without affecting the production progress, the mixing time should be appropriately extended, which is conducive to the full and even release of the performance of the synergist, and the strength of the concrete is more guaranteed;

During construction, materials added with synergists will retain water inside, and the surface of the materials will appear slightly dry. This situation may prompt the construction site to add more water to the tanker, so more communication with the construction site is required.

Scope of application

Suitable for structural concrete and large underground concrete structures with impermeability and waterproof requirements;

Various fluid concrete, self-compacting concrete, and large-volume concrete constructed in high-temperature seasons.

statement:

The applicable scope, usage conditions and suggestions of Furman Group products are formulated based on the company's latest technology and experience. They are based on normal conditions and appropriate storage, handling and appropriate use. Due to the actual application of raw materials and coordination Due to different conditions of use, the conditions stated in this product brochure, written suggestions and other advice do not guarantee product performance and applicability to special circumstances, and do not assume legal liability. The rights of third parties must be respected. Users are advised to pay attention to the company's latest product manuals.