Wet mix mortar plastic retainer (liquid)

Product introduction

Wet-mix mortar plastic stabilizer is the core material for the production of wet-mix mortar in concrete mixing stations. It is made of a variety of organic and inorganic water-retaining thickening materials and retarders through high-tech technology. It can control the hardening speed and other properties of wet-mix mortar. Index of special liquid compound additives. Therefore, "Ready-mixed Mortar" ( GB/T25181-2019）、《 Standard for test methods for basic performance of building mortar" ( JGJ/T70-2009）、《 Ready-mixed Mortar Application Technical Regulations" ( JGJ/T223-2010）、《 Wet mix mortar plastic stabilizer》( Q/FEM001-2019） As the design basis, raw materials produced with advanced Japanese technology are introduced and carefully blended.

Features

Super plastic-preserving function, the operating time of the mortar can be adjusted within 24 hours according to production requirements;

The bonding force between the mortar and the wall is good, which can significantly reduce the shrinkage and deformation of the mortar and avoid hollowing and cracking of the mortar;

After the mortar is applied to the wall, the mortar solidifies and hardens normally. It does not need to be dry and becomes hard immediately after use;

Excellent workability and sag resistance, greatly improving plastering efficiency and machine spraying efficiency.

Technical performance and recommended dosage

The technical properties are inorganic materials, non-toxic and tasteless, the recommended dosage is 10-15 kg / Cube [Note: The amount of plastic stabilizer added to wet-mix mortar can be adjusted accordingly according to the operation time requirements, cement dosage, strength grade, temperature and environmental humidity changes to determine the optimal amount through experiments. 】

How to use and precautions

The longer the operating time requirement, the greater the amount of plastic stabilizer added;

The greater the amount of cement, the greater the amount of plastic stabilizer added;

The higher the temperature, the greater the amount of plastic stabilizer added;

The lower the ambient humidity, the greater the amount of plastic stabilizer added;

The greater the water absorption of the wall, the greater the amount of plastic stabilizer added;

Different varieties and brands of cement also have an impact on the operable time. When changing cement, a mortar trial should be carried out to adjust the amount of plastic stabilizer added.

Scope of application

Suitable for artificial masonry with river sand, river sand and machine-made sand;

Suitable for plastering;

Wet mix mortar of various strength levels suitable for mechanical spraying.

statement:

The applicable scope, usage conditions and suggestions of Furman Enterprise's products are formulated based on the company's latest technology and experience. They are based on normal conditions and appropriate storage, handling and appropriate use. Due to the actual application of raw materials and coordination Due to different conditions of use, the conditions stated in this product brochure, written suggestions and other advice do not guarantee product performance and applicability to special circumstances, and do not assume legal liability. The rights of third parties must be respected. Users are advised to pay attention to the company's latest product manuals.