Dry mix mortar additives

Product introduction

Dry-mixed mortar additives are powder-type chemical additives made by appropriately blending water-reducing, water-retaining and thickening, coagulant, fiber and other components according to the performance indicators of different types of mortars.

Features

Improve the working performance of dry-mixed mortar, including plastic retention, water retention, viscosity increasing, etc.;

Adjust mortar setting time and hardening performance;

Improve mortar durability;

Improve mortar volume stability;

Improve the mechanical properties of mortar;

Improve other mortar properties.

Technical performance and recommended dosage

Technical performance additives do not produce new compounds, are non-toxic and non-flammable. The recommended dosage of dry-mixed mortar additives is powder, and the recommended dosage is 0.04%-0.10% of the mortar mass. [Note: The specific dosage should be determined according to the actual requirements of the project. 】

How to use and precautions

Dry-mixed mortar additives have special physical and chemical properties, and the workability of the mortar is better than other additives with the same amount added.

It improves the workability of dry-mixed mortar and makes it easy to spread into a uniform and thin layer, which facilitates construction and reduces dust on the ground.

The use of advanced production technology greatly increases the effective ingredients of the product, and improves the performance of the mortar while reducing the overall cost of the mortar.

With high bonding force, the mortar layer and the bottom surface are firmly bonded, and will not crack or fall off for a long time, and there will be no hollowing phenomenon.

Package:Paper and plastic product packaging25 kg/ bag. Storage: 40 ℃Store in the following environment, pay attention to moisture, and use up as soon as possible after opening the package.

Shelf life:18months.

Scope of application

Suitable for dry mix mortar.

statement:

The applicable scope, usage conditions and suggestions of Furman Group products are formulated based on the company's latest technology and experience. They are based on normal conditions and appropriate storage, handling and appropriate use. Due to the actual application of raw materials and coordination Due to different conditions of use, the conditions stated in this product brochure, written suggestions and other advice do not guarantee product performance and applicability to special circumstances, and do not assume legal liability. The rights of third parties must be respected. Users are advised to pay attention to the company's latest product manuals.