Inorganic nano mortar waterproofing agent

Product introduction

FEM mortar waterproof agent is composed of reinforcing component and catalytic component, which react chemically with cement hydration precipitates to generate gel and crystal, and fill the capillary pores of cement stone. It is an orange inorganic solution that can improve the compactness and impermeability of mortar.

使用FEM无机纳米砂浆防水剂前后对比                     使用后滴水不进 形成密实防水层

Implementation standards

JC474-2008《 Mortar, concrete waterproofing agent》

Product Features

Good dispersibility: Inorganic water-soluble materials with low dosage and good dispersibility;

Impermeable and moisture-proof: used for impermeable and moisture-proof treatment of the surface layer of the structure, which can improve the compactness and impermeability of the waterproof mortar, forming a rigid waterproof layer.

Compressive and tensile strength: initial setting time>50min, final setting time<4h, bonding force>1.0MPa, compressive and tensile strength increased by 20% -30% respectively.

Ultra long durability: Inorganic waterproof material, will not age or deteriorate, has stable effects, and achieves the same lifespan as concrete structures.

Good crack resistance: can effectively reduce the shrinkage and cracking of waterproof mortar.

Energy conservation and environmental protection: in compliance with national green environmental protection standards.

Key points of construction

Material ratio: The dosage is 2% of the mortar mass, and the actual dosage needs to be determined through trial mixing.

Concealed engineering acceptance: The base surface should be cleaned and free of debris, and the concealed engineering acceptance is qualified.

During construction: According to different process requirements, it is necessary to do a good job in controlling the overlap, stubble throwing, and thickness.

Finished product protection: After the construction of waterproof mortar, timely maintenance should be carried out. Before reaching the design specifications, it is strictly prohibited to use people for construction or stack heavy objects.

transportation and storage

This product is non-toxic, harmless, non-flammable and non-volatile. It can be stored at normal temperature and pressure and transported as general cargo.

statement:

The applicable scope, usage conditions and suggestions of Furman Group products are formulated based on the company's latest technology and experience. They are based on normal conditions and appropriate storage, handling and appropriate use. Due to the actual application of raw materials and coordination Due to different conditions of use, the conditions stated in this product brochure, written suggestions and other advice do not guarantee product performance and applicability to special circumstances, and do not assume legal liability. The rights of third parties must be respected. Users are advised to pay attention to the company's latest product manuals.